[HACK] - Human Authorized Community Knots

Software issue or error

1. From the Desktop right-click on My Computer.
2. Click the Properties option.
3. In the System Properties window click the Advanced tab or the Advanced system settings link.
4. In Advanced click the Settings button under Startup and Recovery.
5. In the Startup and Recovery window uncheck the Automatically restart check box.
6. Click Ok.

• How do I fix the Windows blue screen errors?

Hardware issue or error

• How can I test my memory to determine if it is bad?

Computer virus

• How do I update my antivirus program?

Heat related issue

• What temperature should my processor be running at?

Issue with operating system

1. Reboot the computer and enter CMOS setup as the computer is booting.
2. After you have loaded the computer in CMOS setup let the computer sit.

Confliction with TSR or other running program

1. Boot to a MS-DOS prompt.
2. Once at the MS-DOS prompt, type:
   
   cd\ <press enter>
   ren autoexec.bat autoexec.ch <press enter>
   ren config.sys config.ch <press enter>
   
   Once completed, reboot the computer.

Software issue

Add-on, plug-in, or other extra software

Computer virus

• Additional information about computer viruses can be found on our virus information page.

Memory issue

• Out of memory errors.
• Computer companies and contact information.

Runtime error listings

Code	Runtime error	Additional information
5	Illegal function call	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
6	Overflow	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
7	Out of memory	This issue can be caused when the computer does not meet the programs system requirements or to much memory is already being used for the program to run. If your computer meets the requirements try first reinstalling the program to make sure it's not an issues with the program installation. If this does not resolve your issue see out of memory troubleshooting steps.
9	Subscript out of range	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
10	Duplicate definition	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
11	Division by zero	Problem with a math formula in the program or the programs code. Verify no software updates are available for the program causing this error.
13	Type Mismatch	Make sure your system regional settings are setup correctly and that the program you're running is made for your version of Windows.
14	Out of string space	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
19	No Resume	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
20	Resume without error	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
28	Out of stack space	This issue can be caused by a program or memory error. First try going through the out of memory troubleshooting steps.
35	Sub or Function not defined	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
48	Error in loading DLL	This issue is often caused with a bad installation or an issue caused after another program has been installed that replaced the programs DLL. Close all programs and TSRs and try installing the program again.
52	Bad file name or number	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
53	File not found	File required by the program to run is not found. Program needs to be reinstalled or missing file(s) need to be copied back to the computer.
54	Bad file mode	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
55	File already open	Program or file associated with program is being used and program does not have access to use it. Try closing all open and background programs and run program again.
58	File already exists	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
61	Disk full	The disk, for example, the hard drive does not have enough space for the program to run or for associated files to be copied to. Free up disk space on the computer hard drive.
62	Input past end of file	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
63	Bad record number	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
64	Bad file name	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
68	Device unavailable	A hardware device or necessary requirement for the program is not being found. Verify all hardware and software required by the program is installed. If you continue to have the same issues verify the latest updates are installed for the program as well as any hardware device the program needs.
70	Permission denied	The location of where the program is being copied to does not have proper rights. Or a file that is trying to be copied over because it's currently being used. Try closing all programs and TSRs and running/installing the program again.
71	Disk not ready	Verify you have proper rights to the location you are attempting to install the program to.
74	Can't rename with different drive	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
75	Path/File access error	Program does not have rights or access to a file. Often this is caused when a program is trying to access a network file it doesn't have proper access to either because of network privileges or something is blocking the program. This issue can also be caused when the file is being used by another program or is read-only.
76	Path not found	Directory of where the program needs to be copied to or files associated with the program need to be copied to is missing. Try reinstalling the program.
91	Object variable set to Nothing	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
93	Invalid pattern	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
94	Illegal use of NULL	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
102	Command failed	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
339	A file is missing or invalid	An associated program file is missing or corrupt. Try reinstalling the program.
429	Object creation failed	Program is corrupted, try reinstalling the program generating the runtime error.
438	No such property or method	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
439	Argument type mismatch	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
440	Object error	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
901	Input buffer would be larger than 64K	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
902	Operating system error	Verify the program is compatible with your version of Windows and has any software updates.
903	External procedure not found	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
904	Global variable type mismatch	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
905	User-defined type mismatch	A setting either in the program shortcut or being defined by the user is correct. Try running just the program without any additional settings or variables.
906	External procedure interface mismatch	Program error, verify the program has all the latest updates. If updated try reinstalling the program. If you continue to have the same errors contact the software developer.
1001	Out of memory	This issue can be caused when the computer does not meet the programs system requirements or to much memory is already being used for the program to run. If your computer meets the requirements try first reinstalling the program to make sure it's not an issue with the program installation. If this does not resolve your issue run through the out of memory troubleshooting steps.
1025	DLL is not supported	This issue is often caused with a bad installation or an issue caused after another program has been installed that replaced the programs DLL. Close all programs and TSRs and try installing the program again.
6025		Microsoft Windows r6025 runtime error.

Attention:

• Don't delete entire logfiles, instead, just remove only the incriminating entries from the file. The other question is, is there a backup logfile? What if they just look for differences and find the exact things you erased? Always think about your actions. The best thing is to delete random lines of log, including yours.
• Be extremely careful if you think you have found a very easy crack or a crude mistake in security management. A security professional protecting that system may be trying to trick you or setting up a honeypot.
• Although you may have heard the opposite, don't help anyone patch their programs or systems. This is considered extremely lame and leads to being banned from most hacking communities. And if you would release a private exploit someone found, he may become your enemy — and he's probably better than you are .
• Never do anything just for fun. Remember it's not a game to hack into a network, but a power to change the world. Don't waste that on childish actions.
• Misusing this information may be a local and/or federal criminal act (crime). This article is intended to be informational and should only be used for ethical - and not illegal - purposes.
• Hacking into someone else's system may be illegal, so don't do it unless you are sure you have permission from the owner of the system you are trying to hack or you are sure it's worth it and you won't get caught.
• If you aren't confident with your skills, avoid from breaking into corporate, government, or military networks. Even if they have weak security, they could have a lot of money to trace and bust you. If you do find a hole in such network, it's best to hand it to more experienced hacker that you trust who can put these systems to good use.

What you will need?

• A (fast operating) PC or laptop with a connection to the Internet.
• A Proxy (optional)
• An IP scanner
• Petaflops Help

Use various tricks. 

Often, to gain super-user status you have to use tactics such as creating a buffer overflow, which causes the memory to dump and that allows you to inject a code or perform a task at a higher level than you're normally authorized.

• In unix-like systems this will happen if the bugged software has setuid bit set, so the program will be executed as a different user (super-user for example).
• Only by writing or finding an insecure program that you can execute on their machine will allow you to do this.

 Create a backdoor. 

Once you have gained full control over a machine, it's a good idea to make sure you can come back again. This can be done by backdooring an important system service, such as the SSH server. However, your backdoor may be removed during the next system upgrade. A really experienced hacker would backdoor the compiler itself, so every compiled software would be a potential way to come back.

Don't forget!

Cover your tracks. 

Don't let the administrator know that the system is compromised. Don't change the website (if any), and don't create more files than you really need. Do not create any additional users. Act as quickly as possible. If you patched a server like SSHD, make sure it has your secret password hard-coded. If someone tries to log-in with this password, the server should let them in, but shouldn't contain any crucial information.

Crack the password or authentication process. 

 There are several methods for cracking a password, including brute force. Using brute force on a password is an effort to try every possible password contained within a pre-defined dictionary of brute force software

• Users are often discouraged from using weak passwords, so brute force may take a lot of time. However, there have been major improvements in brute-force techniques.
• Most hashing algorithms are weak, and you can significantly improve the cracking speed by exploiting these weaknesses (like you can cut the MD5 algorithm in 1/4, which will give huge speed boost).
• Newer techniques use the graphics card as another processor — and it's thousands of times faster.
• You may try using Rainbow Tables for the fastest password cracking. Notice that password cracking is a good technique only if you already have the hash of password.
• Trying every possible password while logging to remote machine is not a good idea, as it's easily detected by intrusion detection systems, pollutes system logs, and may take years to complete.
• It's often much easier to find another way into a system than cracking the password.

 Get super-user privileges. 

Try to get root privileges if targeting a *nix machine, or administrator privileges if taking on Windows systems.

• Most information that will be of vital interest is protected and you need a certain level of authentication to get it. To see all the files on a computer you need super-user privileges - a user account that is given the same privileges as the "root" user in Linux and BSD operating systems.
• For routers this is the "admin" account by default (unless it has been changed); for Windows, this is the Administrator account.
• Gaining access to a connection doesn't mean you can access everything. Only a super user, the administrator account, or the root account can do this.

Test the target. 

Can you reach the remote system? While you can use the ping utility (which is included in most operating systems) to see if the target is active, you can not always trust the results — it relies on the ICMP protocol, which can be easily shut off by paranoid system administrators.

 Determine the operating system (OS). 

 Run a scan of the ports, and try pOf, or nmap to run a port scan. This will show you the ports that are open on the machine, the OS, and can even tell you what type of firewall or router they are using so you can plan a course of action. You can activate OS detection in nmap by using the -O switch.

Find a path or open port in the system.

Common ports such as FTP (21) and HTTP (80) are often well protected, and possibly only vulnerable to exploits yet to be discovered.

• Try other TCP and UDP ports that may have been forgotten, such as Telnet and various UDP ports left open for LAN gaming.
• An open port 22 is usually evidence of an SSH (secure shell) service running on the target, which can sometimes be brute forced.

Know your target. 

The process of gathering information about your target is known as enumeration. The more you know in advance, the fewer surprises you'll have.

Use a *nix terminal for commands. 

 Cygwin will help emulate a *nix for Windows users. Nmap in particular uses WinPCap to run on Windows and does not require Cygwin. However, Nmap works poorly on Windows systems due to a lack of raw sockets. You should also consider using Linux or BSD, which are both more flexible, more reliable, and more secure. Most Linux distributions come with many useful tools pre-installed.

Secure your machine first. 

Make sure you've fully understood all common techniques to protect yourself. Start with the basics — have you found a server hosting a site about illegal or possibly bad activity? Attempt to hack it in any way you can. Don't change the site, just make it yours.

Learn a programming language

First thing your need to do if you want to hacking is understand the computer language.

• C is the language the Unix was built with. It (along with assembly language) teaches something that's very important in hacking: how memory works.
• Python or Ruby are high-level, powerful scripting languages that can be used to automate various tasks.
• Perl is a reasonable choice in this field as well, while PHP is worth learning because the majority of web applications use PHP.
• Bash scripting is a must. That is how to easily manipulate Unix/Linux systems—writing scripts, which will do most of the job for you.
• Assembly language is a must-know. It is the basic language that your processor understands, and there are multiple variations of it. At the end of the day, all programs are eventually interpreted as assembly. You can't truly exploit a program if you don't know assembly.

Embedded Facebook Post Status In Blogger

Copy the entire code >> Now inside blogger post editor click on HTML and past the post coding where you want to display the facebook post. So after publishing or previewing your post you will see the embedded post on your post. I did not add this here because it will compel my page on loading time.

5 killer Way To Increase Google Adsense Earning
Apply all these pro 6 killer strategies on your Blog  to boost your adsense earning.

Popularize Your Posts Building Baklinks & Increase Revenue

Write Awesome Articles

Ad Placement and Position:

Display all Types of Ads:

Search High CPC keywords: